Dryer Repair in Orange County

Dryer Repair in Orange County

Dryer Repair

While many people might say that the dryer is not as important for daily life as its brother the washing machine, the dryer still has a very important role in the house. This is especially true during the winter months when many areas of the country lack the warmth and sunlight that is needed for quick air drying outside. When the dryer breaks down, it can create a hardship for people when it comes to doing their laundry on a regular basis.

There are a few common issues took look for with dryers and a few easy ways to fix them when they breakdown. A few of the more common issues involve taking too long to dry clothes adequately, the dryer not producing enough heat, the dryer destroying clothing, issues with starting and finally issues with the tumbling cycle. Luckily, all of these issues can be corrected with some basic dryer repair work.

Dryer Taking Too Long to Dry Clothes

Having a dryer that takes too long to dry clothes can be frustrating as you will need to keep rerunning the dryer over and over hoping that the next time it will produce clothes that are actually dry. Fixing this problem can be part of some of the most basic repairs when it comes to dryer repair.

First off, make sure that the lint trap is clean. If you are not cleaning the lint trap on a regular basis, it is possible that it is clogging up and not allowing the dryer to work properly. Simply remove it from the unit and discard the lint that has built up over time. If the trap is damaged, it will need to be replaced.

If the issue is not there, check the venting hose. A dryer is heavily dependent on the amount of air that runs through it. With that in mind, if there is a blockage somewhere in the venting hose, the amount of air will be heavily limited. This in turn causes the dryer to take longer to dry the clothes.

Next, open the cabinet on the dryer and find the heating element. It is best to use the owner’s manual or do an online search for specifics as to where the heating element is located on your particular unit. Test the element to the specifications in the owner’s manual and determine if it is working properly. If not, it will need to be replaced.

Finally, there may be an issue with the thermostat. This is the least likely, although it is a possibility. Test every thermostat in the dryer to ensure that they are all working properly. Once again, consult the owner’s manual for the exact specifications for your model. If any thermostat is not working as it should, replace them accordingly.

Dryer Not Producing Heat

If the dryer is not producing heat there are a few potential sources of the problem. First of all, ensure that the dryer is operating at the correct voltage and check for any blown fuses. Also ensure that the circuit breakers are working properly. Make sure to take all the necessary safety precautions when doing these tasks and seek professional help if you are uncomfortable performing the tasks. If the source of the problem is not there, the problem may be found as before in the heating element or thermostat. However, the source of the problem may also be in the timer motor or thermal fuse. Test both of these items to make sure that they are both working properly to the specifications that are laid out in the owner’s manual. If not, replace them as necessary.

When it comes to dryer repair, there are usually a few key sources of faults. Once you are familiar with them, many of the tasks are relatively easy and will not take much time. It is more a matter of learning the parts and how they work that will take much of your time.

Dryer Destroying Clothing

Nobody wants to see their clothing destroyed by the dryer; however it can happen if the dryer malfunctions. This would be perhaps the most popular reason to truly seek out help with dryer repair. If this is happening check the front and rear seal. If these seals are damaged or missing completely, the clothing is coming into contact with the wall or drum. As the clothes tumble they will catch in these areas and rip as they are pulled by the different parts of the dryer. Ripped clothing is usually a sign that the clothing is coming into contact with a moving component that it otherwise should not be. The two other parts to check for damage or wear are the drum glides and support rollers. As with the seals, wear to these parts will result in pinches that grab the clothes and rip them during the tumbling cycle.

Dryer Not Starting

In the event that the dryer is simply not starting, once again take out the owner’s manual and find the location of a few key parts when it comes to dryer repair. The first of which is the motor. If the motor is defective or if it has simply burned out then it is time to replace it. This is also true of a few of the parts previously discussed in the thermal fuse and thermostat. Finally, the dryer will not operate if either the door or start switch are not working. Using the proper dryer repair safety precautions, test both switches for faults and replace if necessary.

The final troubleshooting tip comes from the tumbling process. In specific, some dryers will cease to actually engage in this cycle. If this happens, check the belts in the dryer for wear or breakage and replace them if you find faults. Next check the pulley wheel. It is possible that the actual belt is in working condition, but paired with a faulty pulley it is essentially useless. If this is the case, replace the faulty component and continue troubleshooting.

Conclusion

Dryer repair can be complicated the first few times you attempt it, but the learning curve gets better a time goes on. If at any time you do not feel comfortable performing a task, it is always best to ask for help from a professional in the area of dryer repair.